Production technology

Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet, for F48 and F66 collets. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible...

Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: W20, W25, 5C, B32, B45 – round, square...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: ASA 2 short taper (A2, DIN 55026), 2-4 to 2-6, 6 screws M10 Compatible clamping heads: size 32 / 42...

Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20, W25, 5C, B32,...

Automatic collet chuck with axially fixed (dead-length) collet: no axial movement and no pull-back effect when clamping. For bar work, ideal with radial tools. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: W20, W25, 5C, B32, B45...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: cylindrical spindle ø 120 / 140 mm H6, 6 screws M10 Compatible clamping heads: size 32 / 42 Operation: draw-type...

Automatic collet chuck with axially fixed (dead-length) collet: no axial movement and no pull-back effect when clamping. For bar work, ideal with radial tools. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20,...

Tailstock with cast-iron housing, for centre heights of 100 to 250 mm, matching the FN manual dividing head. Housing: cast iron Clamping: on the left Centre: half centre 60° Morse taper: MT 2 to MT 4 depending on size Weight: 6.1 to 23.1 kg...

Automatic collet chuck for bar work, with threaded nose for expanding mandrels and pre-machined funnel collets. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: draw-type collets W20 and W25 – standard or long version L; expanding mandrels...

Automatic collet chuck for bar work, with threaded nose for expanding mandrels and pre-machined funnel collets. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20 and W25; expanding mandrels on the...

Mounting plate for the FN manual dividing head. Available from ø 160 to ø 315 mm. Use: accessory for the FN manual dividing head Diameters: ø 160, 200, 250 and 315 mm Thread G: M10 to M16 depending on size Weight: 3.9 to 19.5...

Dividing head with quick manual indexing, for vertical or horizontal use. Available with cast-iron chuck or without chuck. Divisions: 2 / 3 / 4 / 6 / 8 / 12 / 24, quick setting via stop Accuracy: division 2'; taper run-out, parallelism and squareness...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: draw-type collets W20, W25, 5C, B32, B45 – standard...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: ASA 2 short taper (A2, DIN 55026), 2-4 to 2-8, 6 screws M10, M12 or M16 Compatible clamping heads: size...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20, W25, 5C,...

Double-acting pneumatic fixture clamping with push-type collets, ideal for work without indexing. Parts stay firmly held without distortion. Good to know: Collets are not included: the variant indicates the collet type the fixture accepts. Shapes: square (vertical or horizontal) or round (vertical only) Compatible...

Static base plate of the Ottet pneumatic clamping system. Stationary version, listed in the catalogue with the FNO-P and FNO-PH pneumatic chucks. System: pneumatic clamping with Ottet collets (FNO range) Version: static, for stationary use Dimensions: A 150 mm, B 56 mm, C 100...

Compact automatic collet chuck for DIN 6343 push-type collets. Designed for high-speed bar work on lathes with bar feeder. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5, 6 or 8 Compatible collets: F48 and F66 push-type collets (DIN 6343), Rubberflex and...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: cylindrical spindle ø 140 / 170 / 220 mm H6, 6 screws M10, M12 or M16 Compatible clamping heads: size...

Pneumatic collet chuck for Ottet collets with built-in clamping piston. Fits machines with or without a draw cylinder: a rotary air union is all that is needed. Models: FNO-PH with stroke limitation; FNO-P with built-in cylinder Compatible collets: Ottet collets, for external and internal...