-
Vendor:Heidi | Shop
SCHAUBLIN W15 Pull-Type Collet
SCHAUBLIN W15 Pull-Type Collet The SCHAUBLIN type W Pull-Type Collet provides axial clamping by drawing the collet into its seat using a suitable wrench. It features an external thread whose nominal diameter nearly matches the collet body, ensuring a secure and precise fit. Recommended...- From CHF 71.00
- From CHF 71.00
- Unit price
- per
-
Vendor:Heidi | Shop
FN 3-jaw chuck steel ø 125 - Schaublin 102 lathe
FN 3-jaw chuck steel ø 125 W20 (For Schaublin 102 lathe) With W20 thread fixing. Standard accessories: 1 set of drilling jaws 1 set of turning jaws 1 set of screws, tightening key Produced by Niederhauser.- CHF 1,559.00
- CHF 1,559.00
- Unit price
- per
-
Vendor:Heidi | Shop
FN cast iron 3-jaw chuck ø 100 W12 - Schaublin 70 lathe
FN cast iron 3-jaw chuck ø 100 W12 (For Schaublin 70 lathe) With W12 thread fixing. Standard accessories: 1 set of drilling jaws 1 set of turning jaws 1 set of screws, tightening key Niederhauser product- CHF 1,082.00
- CHF 1,082.00
- Unit price
- per
-
Vendor:Heidi | Shop
FN 3-jaw chuck steel ø 80 W12 - Schaublin 70 lathe
FN 3-jaw chuck steel ø 80 W12 (For Schaublin 70 lathe) With W12 thread fixing. Standard accessories: 1 set of drilling jaws 1 set of turning jaws 1 set of screws, tightening key Niederhauser product.- CHF 1,084.00
- CHF 1,084.00
- Unit price
- per
-
Vendor:Heidi | Shop
FN cast iron 4-jaw chuck ø 110 W12 - Schaublin 70 lathe
FN cast iron 4-jaw chuck ø 110 W12 (For Schaublin 70 lathe) With W12 thread fixing. Standard accessories: 1 set of drilling jaws 1 set of turning jaws 1 set of screws, tightening key Niederhauser product- CHF 1,425.00
- CHF 1,425.00
- Unit price
- per
-
Vendor:Heidi | Shop
FN cast iron 3-jaw chuck ø 110 W12 - Schaublin 70 lathe
FN cast iron 3-jaw chuck ø 110 W12 (For Schaublin 70 lathe) With W12 thread fixing. Standard accessories: 1 set of drilling jaws 1 set of turning jaws 1 set of screws, tightening key Niederhauser product- CHF 1,164.00
- CHF 1,164.00
- Unit price
- per
-
Vendor:Heidi | Shop
Two-Stage Rotary Vane Vacuum Pump GVD 1.5 Atlas Copco
The GVD 1.5 two-stage rotary vane vacuum pump by Atlas Copco is a professional model combining performance and quiet operation. Perfect for use with various machines and systems, such as workbench blowers, it ensures efficiency and reliability. Key Features: Quiet Operation: Only 54 dB,...- CHF 3,500.00
- CHF 3,500.00
- Unit price
- per
-
Vendor:Heidi | Shop
Two-Stage Rotary Vane Vacuum Pump GVD 0.7 Atlas Copco
The GVD 0.7 two-stage rotary vane vacuum pump by Atlas Copco is a professional model combining performance and quiet operation. Perfect for use with various machines and systems, such as workbench blowers, it ensures efficiency and reliability. Key Features: Quiet Operation: Only 47 dB,...- CHF 3,300.00
- CHF 3,300.00
- Unit price
- per
-
Vendor:Heidi | Shop
TOHNICHI - 3-jaw steel chuck – 321
TOHNICHI - 3-jaw steel chuck for ATG/ATGE-G – 321 The TOHNICHI 321 3-jaw steel chuck provides concentric gripping of 1–6.5 mm parts. Compatible with ATG and ATGE-G electronic torque controllers, it enhances measurement accuracy. Material: steel jaws and clamping ring Clamping range: 1 –...- CHF 157.50
- CHF 157.50
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" A22.8 feedfingers
Feedfingers : used to feed the bars to be machined. Depending on the assembly, a distinction is made between feed and feed clamps. Type A collets : closed at rest. Opening is achieved by inserting a bar with a chamfered end to facilitate insertion. The...- CHF 115.00
- CHF 115.00
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" A17.9 Feedfingers
Feedfingers : used to feed the bars to be machined. Depending on the assembly, a distinction is made between feed and feed clamps. Type A collets: closed at rest. Opening is achieved by inserting a bar with a chamfered end to facilitate insertion. The...- CHF 108.00
- CHF 108.00
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" A17.9 hexagonal feedfingers
Feedfingers : used to feed the bars to be machined. Depending on the assembly, a distinction is made between feed and feed clamps. Type A collets : closed at rest. Opening is achieved by inserting a bar with a chamfered end to facilitate insertion. The...- CHF 208.00
- CHF 208.00
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" A22.8 hexagonal Feedfingers
Feedfingers : used to feed the bars to be machined. Depending on the assembly, a distinction is made between feed and feed clamps. Type A collets : closed at rest. Opening is achieved by inserting a bar with a chamfered end to facilitate insertion. The...- CHF 215.00
- CHF 215.00
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" B32 pull-type collets
SCHAUBLIN B32 Pull-Type Collet Designed for precise clamping operations in turning and machining. Available with round bore diameters from Ø 0.5 to 32 mm. Clamping is achieved by pulling the collet into its seat using a tightening key. Reduced external thread: ideal for toolmaker's...- From CHF 105.00
- From CHF 105.00
- Unit price
- per
-
Vendor:Heidi | Shop
Set of 59 SCHAUBLIN B32 Pull-Type Collets
Set of 59 SCHAUBLIN B32 Pull-Type Collets – Ø 1 to 30 mm Ideal for precise and versatile clamping in turning and machining operations. Clamping is performed by pulling the collet into its seat using a tightening key. Reduced external thread: perfect for toolmaker...- CHF 6,320.00
- CHF 6,320.00
- Unit price
- per
-
Vendor:Heidi | Shop
Set of 30 "SCHAUBLIN" B32 Pull-Type Collets
Set of 30 SCHAUBLIN B32 Pull-Type Collets – Ø 1 to 30 mm Ideal for precise and versatile clamping in turning or machining operations. Clamping is achieved by pulling the collet into its seat using a tightening key. Reduced external thread: perfect for toolmaker...- CHF 3,233.00
- CHF 3,233.00
- Unit price
- per
-
Vendor:Heidi | Shop
"SCHAUBLIN" B32 square pull-type collets
SCHAUBLIN B32 pull-type collets with square bore from C4 to C17. Pull-type collets B – SCHAUBLIN Tightening is carried out by pulling the clamp into its housing using a tightening key. Reduced external thread : ideal for toolmaking lathes and high-precision machines. Compatible with...- CHF 255.00
- CHF 255.00
- Unit price
- per
-
Vendor:Heidi | Shop
SCHAUBLIN B32 Pull-Type Collet with Hexagonal Bore
SCHAUBLIN B32 Pull-Type Collet with Hexagonal Bore – s4 to s20 mm Designed for accurate clamping operations in turning and machining. Clamping is achieved by pulling the collet into its seat using a tightening key. Reduced external thread: ideal for toolmaker lathes and high-precision...- CHF 205.00
- CHF 205.00
- Unit price
- per
-
Vendor:Heidi | Shop
SCHAUBLIN B8 Nose Collet
SCHAUBLIN B8 Nose Collet – Bore Ø0.5 to 6 mm Perfect for precise and versatile clamping in turning or machining operations. Clamping is done by pulling the collet into its seat using a tightening key. Reduced external thread: ideal for toolmaker lathes and high-precision...- From CHF 153.00
- From CHF 153.00
- Unit price
- per
-
Vendor:Heidi | Shop
Set of 47 SCHAUBLIN B32 Pull-Type Collets
Set of 47 SCHAUBLIN B32 Pull-Type Collets – Ø 1 to 24 mm Ideal for precise and versatile clamping in turning or machining operations. Clamping is performed by pulling the collet into its seat using a tightening key. Reduced external thread: ideal for toolmaker...- CHF 5,079.00
- CHF 5,079.00
- Unit price
- per
- Choosing a selection results in a full page refresh.
