Results for “waldmann*”

Precision 4-jaw Westcott system chuck with special cast iron body and DIN 6350 mounting. Individually adjustable jaws and centric clamping, from ø 125 to ø 630 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and chosen...

Ground Collet Blanks SCHAUBLIN – W12 d30x40 The SCHAUBLIN ground collet blanks in model W12 d30x40 feature a ground shank and taper matching standard collets of the same type. The section just ahead of the clamping taper is intentionally left blank and extended so...

Key-operated manual collet chuck for Schaublin draw-type collets and American 5C collets. For lathes, milling and drilling machines. Good to know: To mount it on your lathe, add the adapter flange that matches your spindle nose (DIN 55026, 55027 or 55029), sold separately. Collets...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20, W25, 5C,...

Automatic collet chuck with axially fixed (dead-length) collet: no axial movement and no pull-back effect when clamping. For bar work, ideal with radial tools. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20,...

Ultra-precision FN-Tru 3-jaw chuck with cast iron body and central clamping, DIN 6350 mounting. Very fine radial adjustment for perfect concentricity, from ø 80 to ø 315 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and...

Set of Niederhauser hard reversible jaws, replacing the stepped jaws of the 4-jaw Westcott chuck. Reverse them to switch from external to internal clamping. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Jaws: hard, stepped, reversible Sizes: chucks ø...

Precision 4-jaw scroll chuck with steel body, for lathes with W-type threaded spindle (Schaublin). Fast concentric clamping, from ø 100 to ø 160 mm. Good to know: Ready to mount: screws directly onto the lathe's threaded spindle nose (W 12 = Schaublin 70, W...

Set of Niederhauser one-piece soft jaws for the 4-jaw Westcott chuck: turned in place to the workpiece diameter, they give full contact without marking the part. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Accuracy: good concentricity after turning...

The Tripan® 131 accepts turning tools with a square cross-section up to 12.5 mm. Compatible with Series 1 and 2 clamping assemblies, it can accommodate a 259-0 blade holder for mounting Supercoup® 2010 blades.

Dividing head with quick manual indexing, for vertical or horizontal use. Available with cast-iron chuck or without chuck. Divisions: 2 / 3 / 4 / 6 / 8 / 12 / 24, quick setting via stop Accuracy: division 2'; taper run-out, parallelism and squareness...

Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20, W25, 5C, B32,...

Key-operated manual collet chuck with threaded nose for a clamping nut. For Schaublin draw-type collets W 20 and W 25. Good to know: To mount it on your lathe, add the adapter flange that matches your spindle nose (DIN 55026, 55027 or 55029), sold...

Automatic collet chuck for bar work, with threaded nose for expanding mandrels and pre-machined funnel collets. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20 and W25; expanding mandrels on the...