Results for “waldmann*”

Sidebar
Filter
1000 results
    Sort

    Sort by:
      • Plateau circulaire 4 mors acier – DIN 6350 – Niederhauser
        Niederhauser
        From CHF 1,032.00
        From CHF 1,032.00

        Steel 4-jaw faceplate – DIN 6350

        Niederhauser faceplate with 4 independent jaws for clamping non-cylindrical, off-centre or irregularly shaped workpieces. Each jaw is adjusted separately for precise centring. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and chosen to match your spindle nose:...
      • Mandrin porte-pinces FNH-KA – ASA A2 – NiederhauserMandrin porte-pinces FNH-KA – ASA A2 – Niederhauser – schéma coté
        Niederhauser
        From CHF 2,873.00
        From CHF 2,873.00

        Collet chuck FNH-KA – ASA A2

        Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: ASA 2 short taper (A2, DIN 55026), 2-4 to 2-6, 6 screws M10 Compatible clamping heads: size 32 / 42...
      • Mandrin porte-pinces Ottet FNO-K – NiederhauserMandrin porte-pinces Ottet FNO-K – Niederhauser – schéma coté
        Niederhauser
        CHF 4,586.00
        CHF 4,586.00

        Ottet collet chuck FNO-K

        Automatic collet chuck for Ottet collets, actuated by the machine's draw cylinder. Its stroke limitation clamps very thin-walled parts without distortion. Mounting: Z-70 or Z-140 (cylindrical), ASA 2-5 or ASA 2-6 depending on variant Compatible collets: Ottet collets, for external and internal clamping Operation:...
      • Flasque acier – DIN 55026 ASA – NiederhauserFlasque acier – DIN 55026 ASA – Niederhauser – schéma coté
        Niederhauser
        From CHF 352.00
        From CHF 352.00

        Steel backplate – DIN 55026 ASA

        Niederhauser steel backplate for mounting a lathe chuck on a DIN 55026 – ASA (A + B) short-taper spindle. Finish-machined on the spindle side, faced on the chuck side; stiffer than the cast iron version. Good to know: The backplate connects the lathe spindle...
      • Mandrin 3 mors fonte – DIN 6350 – NiederhauserMandrin 3 mors fonte – DIN 6350 – Niederhauser – schéma coté
        Niederhauser
        From CHF 484.00
        From CHF 484.00

        3-jaw chuck cast iron – DIN 6350

        Precision 3-jaw scroll chuck with cast iron body and DIN 6350 mounting. Fast, reliable concentric clamping, from ø 80 to ø 800 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and chosen to match your spindle...
      • Mandrin 3 mors fonte – DIN 55029 Camlock – NiederhauserMandrin 3 mors fonte – DIN 55029 Camlock – Niederhauser – schéma coté
        Niederhauser
        From CHF 889.00
        From CHF 889.00

        3-jaw chuck cast iron – DIN 55029 Camlock

        Precision 3-jaw scroll chuck with cast iron body and DIN 55029 Camlock mounting. Fast, reliable concentric clamping, from ø 125 to ø 630 mm. Good to know: Mounts directly on a DIN 55029 (Camlock D1) spindle nose – no backplate needed. Choose the taper...
      • Mandrin 4 mors acier – DIN 55029 Camlock – NiederhauserMandrin 4 mors acier – DIN 55029 Camlock – Niederhauser – schéma coté
        Niederhauser
        From CHF 1,651.00
        From CHF 1,651.00

        4-jaw chuck steel – DIN 55029 Camlock

        Precision 4-jaw scroll chuck with steel body and DIN 55029 Camlock mounting. Fast, reliable concentric clamping, from ø 125 to ø 630 mm. Good to know: Mounts directly on a DIN 55029 (Camlock D1) spindle nose – no backplate needed. Choose the taper size...
      • Bride d'adaptation – DIN 55027 baïonnette – Niederhauser
        Niederhauser
        From CHF 662.00
        From CHF 662.00

        Adapter flange – DIN 55027 bayonet

        Niederhauser adapter flange for mounting a collet chuck on a spindle with bayonet DIN 55027 nose. Supplied machined on both sides and matched to the ordered chuck. Good to know: The adapter flange is ordered in addition to the collet chuck, which is not...
      • Mandrin porte-pinces FNH-KA – fixation cylindrique – NiederhauserMandrin porte-pinces FNH-KA – fixation cylindrique – Niederhauser – schéma coté
        Niederhauser
        From CHF 2,873.00
        From CHF 2,873.00

        Collet chuck FNH-KA – cylindrical mount

        Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: cylindrical spindle ø 120 / 140 mm H6, 6 screws M10 Compatible clamping heads: size 32 / 42 Operation: draw-type...
      • Mors de perçage trempés – mandrin à spirale – Niederhauser
        Niederhauser
        From CHF 135.00
        From CHF 135.00

        Hardened drilling jaws – scroll chuck

        Set of Niederhauser hardened drilling jaws, mounted in the inner position to clamp bars and workpieces on their outside diameter for drilling or parting off. Good to know: Every new 3- or 4-jaw chuck already comes with one set of drilling jaws and one...
      • Mandrin 4 mors fonte – filetage W (Schaublin) – NiederhauserMandrin 4 mors fonte – filetage W (Schaublin) – Niederhauser – schéma coté
        Niederhauser
        From CHF 1,537.00
        From CHF 1,537.00

        4-jaw chuck cast iron – W thread (Schaublin)

        Precision 4-jaw scroll chuck with cast iron body, for lathes with W-type threaded spindle (Schaublin). Fast concentric clamping, from ø 110 to ø 160 mm. Good to know: Ready to mount: screws directly onto the lathe's threaded spindle nose (W 12 = Schaublin 70,...
      • Mandrin 4 mors Westcott acier – DIN 6350 – NiederhauserMandrin 4 mors Westcott acier – DIN 6350 – Niederhauser – schéma coté
        Niederhauser
        From CHF 2,845.00
        From CHF 2,845.00

        4-jaw Westcott chuck steel – DIN 6350

        Precision 4-jaw Westcott system chuck with steel body and DIN 6350 mounting. Individually adjustable jaws and centric clamping, from ø 200 to ø 630 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and chosen to match...
      • Plateau circulaire 4 mors fonte – DIN 55027 – Niederhauser
        Niederhauser
        From CHF 1,510.00
        From CHF 1,510.00

        Cast iron 4-jaw faceplate – DIN 55027

        Niederhauser faceplate with 4 independent jaws for clamping non-cylindrical, off-centre or irregularly shaped workpieces. Each jaw is adjusted separately for precise centring. Good to know: Mounts directly on a DIN 55027 (bayonet) spindle nose – no backplate needed. Choose the taper size of your...
      • JURA Graver Pro
        Jura Tools
        CHF 4,500.00
        CHF 4,500.00

        JURA Graver Pro

        The JURA Graver PRO is a high-precision, all-in-one pneumatic engraving system with an integrated brushless E-Type micromotor, designed for diamond setting, hand engraving, and advanced precision work. Operating without an external compressor, it offers a compact, quiet, and efficient solution, delivering consistent, precise strokes...
      • Mandrin porte-pinces FNP-KAH – ASA A2 – NiederhauserMandrin porte-pinces FNP-KAH – ASA A2 – Niederhauser – schéma coté
        Niederhauser
        CHF 4,586.00
        CHF 4,586.00

        Collet chuck FNP-KAH – ASA A2

        Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: W20, W25, 5C, B32, B45 – round, square...