Results for “waldmann*”

Precision 4-jaw Westcott system chuck with special cast iron body and DIN 6350 mounting. Individually adjustable jaws and centric clamping, from ø 125 to ø 630 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and chosen...

Key-operated manual collet chuck for Schaublin draw-type collets and American 5C collets. For lathes, milling and drilling machines. Good to know: To mount it on your lathe, add the adapter flange that matches your spindle nose (DIN 55026, 55027 or 55029), sold separately. Collets...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20, W25, 5C,...

Automatic collet chuck with axially fixed (dead-length) collet: no axial movement and no pull-back effect when clamping. For bar work, ideal with radial tools. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20,...

Precision 4-jaw scroll chuck with steel body, for lathes with W-type threaded spindle (Schaublin). Fast concentric clamping, from ø 100 to ø 160 mm. Good to know: Ready to mount: screws directly onto the lathe's threaded spindle nose (W 12 = Schaublin 70, W...

Ultra-precision FN-Tru 3-jaw chuck with cast iron body and central clamping, DIN 6350 mounting. Very fine radial adjustment for perfect concentricity, from ø 80 to ø 315 mm. Good to know: The DIN 6350 mounting fits the lathe via a backplate, sold separately and...

Set of Niederhauser hard reversible jaws, replacing the stepped jaws of the 4-jaw Westcott chuck. Reverse them to switch from external to internal clamping. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Jaws: hard, stepped, reversible Sizes: chucks ø...

Set of Niederhauser one-piece soft jaws for the 4-jaw Westcott chuck: turned in place to the workpiece diameter, they give full contact without marking the part. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Accuracy: good concentricity after turning...

The Tripan® 132 tool holder guarantees high-precision machining thanks to its rigidity and durability. Compatible with Tripan® Series 1 and 2 clamping assemblies, it has a ø13 mm V-shaped opening to accommodate square or round turning tools, ensuring perfect repeatability during frequent tool changes.

Niederhauser cast iron backplate for mounting a lathe chuck on a DIN 55027 / 55022 short-taper spindle. Finish-machined on the spindle side and faced on the chuck side for precise fitting. Good to know: The backplate connects the lathe spindle to a chuck or...

Tripan® 032-40 tool holder assembly, V-shaped Ø6.2 mm opening for square or round turning tools.Compatible with the Tripan® 011 clamping assembly.

Dividing head with quick manual indexing, for vertical or horizontal use. Available with cast-iron chuck or without chuck. Divisions: 2 / 3 / 4 / 6 / 8 / 12 / 24, quick setting via stop Accuracy: division 2'; taper run-out, parallelism and squareness...

Niederhauser adapter flange for mounting a collet chuck on a spindle with Camlock D 1-… DIN 55029 nose. Supplied machined on both sides and matched to the ordered chuck. Good to know: The adapter flange is ordered in addition to the collet chuck, which...

Automatic collet chuck with stroke limitation and axially fixed (dead-length) collet. Clamps very thin-walled parts down to 0.25 mm without distortion. Mounting: cylindrical spindle mount, centring ø 120 H6 or ø 140 H6 (Cyl. 120 / Cyl. 140) Compatible collets: W20, W25, 5C, B32,...