Niederhauser jaws and keys

Niederhauser replacement square key for adjusting the jaws of the precision 4-jaw Westcott-system chuck. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Square: 11 to 19 mm depending on chuck diameter Shared key: one key for ø 500 and...

Set of Niederhauser hard reversible jaws, replacing the stepped jaws of the 4-jaw Westcott chuck. Reverse them to switch from external to internal clamping. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Jaws: hard, stepped, reversible Sizes: chucks ø...

Set of Niederhauser one-piece soft jaws for the 4-jaw Westcott chuck: turned in place to the workpiece diameter, they give full contact without marking the part. Compatible with: Niederhauser precision 4-jaw Westcott-system chucks, cast iron or steel, same diameter Accuracy: good concentricity after turning...

Genuine Niederhauser chuck key for opening and closing the jaws of the FN-Tru ultra-precision 3-jaw chuck. Compatible with: FN-Tru ultra-precision 3-jaw chuck, cast iron, DIN 6350 mounting, ø 80 to 315 mm Selection: code according to chuck diameter Shared key: one key for ø...

Set of Niederhauser hard, stepped reversible jaws for the base jaws: one way round for external clamping, the other for bores or large diameters. Compatible with: hardened base jaws of Niederhauser 3- and 4-jaw scroll chucks, cast iron or steel, ø 125 to 800...

Set of Niederhauser soft top jaws that bolt onto the base jaws: turned in place to the workpiece diameter, they give full contact without marking the part. Compatible with: hardened base jaws of Niederhauser 2-, 3-, 4- and 6-jaw scroll chucks, ø 125 to...

Set of Niederhauser hardened base jaws: they engage the scroll and carry a bolted-on soft or hard top jaw. Changing top jaws no longer wears the chuck thread. Compatible with: Niederhauser scroll chucks with 3 and 4 jaws (ø 125 to 630 mm), 2...

Set of Niederhauser one-piece soft jaws, supplied blank: turned in place to the workpiece diameter, they give full contact and optimum concentricity without marking the part. Compatible with: Niederhauser scroll chucks with 3 and 4 jaws (ø 80 to 630 mm) and 6 jaws...

Set of Niederhauser hardened turning jaws, stepped and reversible: mounted in the outer position, they grip a workpiece in its bore or clamp large diameters. Good to know: Every new 3- or 4-jaw chuck already comes with one set of drilling jaws and one...

Set of Niederhauser hardened drilling jaws, mounted in the inner position to clamp bars and workpieces on their outside diameter for drilling or parting off. Good to know: Every new 3- or 4-jaw chuck already comes with one set of drilling jaws and one...

Niederhauser replacement chuck key for scroll chucks. It drives the pinion, which turns the scroll and moves the jaws centrically. Compatible with: Niederhauser scroll chucks with 2, 3, 4 and 6 jaws, ø 80 to 800 mm Selection: code according to chuck diameter Maintenance:...