Jaw chuck

Dividing head with quick manual indexing, for vertical or horizontal use. Available with cast-iron chuck or without chuck. Divisions: 2 / 3 / 4 / 6 / 8 / 12 / 24, quick setting via stop Accuracy: division 2'; taper run-out, parallelism and squareness...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5 or 6 Compatible collets: draw-type collets W20, W25, 5C, B32, B45 – standard...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: ASA 2 short taper (A2, DIN 55026), 2-4 to 2-8, 6 screws M10, M12 or M16 Compatible clamping heads: size...

Automatic collet chuck for draw-type collets, designed for bar work. Collets seat directly in the chuck body for high concentricity. Mounting: cylindrical spindle mount, centring ø 140 H6 or ø 170 H6 (Cyl. 140 / Cyl. 170) Compatible collets: draw-type collets W20, W25, 5C,...

Double-acting pneumatic fixture clamping with push-type collets, ideal for work without indexing. Parts stay firmly held without distortion. Good to know: Collets are not included: the variant indicates the collet type the fixture accepts. Shapes: square (vertical or horizontal) or round (vertical only) Compatible...

Static base plate of the Ottet pneumatic clamping system. Stationary version, listed in the catalogue with the FNO-P and FNO-PH pneumatic chucks. System: pneumatic clamping with Ottet collets (FNO range) Version: static, for stationary use Dimensions: A 150 mm, B 56 mm, C 100...

Compact automatic collet chuck for DIN 6343 push-type collets. Designed for high-speed bar work on lathes with bar feeder. Mounting: ASA A2 short taper (DIN 55026), taper size 4, 5, 6 or 8 Compatible collets: F48 and F66 push-type collets (DIN 6343), Rubberflex and...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: cylindrical spindle ø 140 / 170 / 220 mm H6, 6 screws M10, M12 or M16 Compatible clamping heads: size...

Pneumatic collet chuck for Ottet collets with built-in clamping piston. Fits machines with or without a draw cylinder: a rotary air union is all that is needed. Models: FNO-PH with stroke limitation; FNO-P with built-in cylinder Compatible collets: Ottet collets, for external and internal...

Compact automatic collet chuck for DIN 6343 push-type collets. Designed for high-speed bar work on lathes with bar feeder. Mounting: cylindrical spindle mount Cyl. 140, 170 or 220 depending on version Compatible collets: F48 and F66 push-type collets (DIN 6343), Rubberflex and large-capacity collets...

Automatic collet chuck for Ottet collets, actuated by the machine's draw cylinder. Its stroke limitation clamps very thin-walled parts without distortion. Mounting: Z-70 or Z-140 (cylindrical), ASA 2-5 or ASA 2-6 depending on variant Compatible collets: Ottet collets, for external and internal clamping Operation:...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: ASA 2 short taper (A2, DIN 55026), 2-4 to 2-8, 6 screws M10 or M12 Compatible clamping heads: size 32...

Automatic collet chuck for clamping heads, for bar stock and chucking parts. The head seats directly in the chuck body for extreme precision. Mounting: cylindrical spindle ø 120 / 140 / 170 mm H6, 6 screws M10 or M12 Compatible clamping heads: size 32...

Precision 4-jaw scroll chuck with steel body, for lathes with W-type threaded spindle (Schaublin). Fast concentric clamping, from ø 100 to ø 160 mm. Good to know: Ready to mount: screws directly onto the lathe's threaded spindle nose (W 12 = Schaublin 70, W...

Precision 4-jaw scroll chuck with cast iron body, for lathes with W-type threaded spindle (Schaublin). Fast concentric clamping, from ø 110 to ø 160 mm. Good to know: Ready to mount: screws directly onto the lathe's threaded spindle nose (W 12 = Schaublin 70,...

Set of Niederhauser hard, stepped reversible jaws for the base jaws: one way round for external clamping, the other for bores or large diameters. Compatible with: hardened base jaws of Niederhauser 3- and 4-jaw scroll chucks, cast iron or steel, ø 125 to 800...

Set of Niederhauser soft top jaws that bolt onto the base jaws: turned in place to the workpiece diameter, they give full contact without marking the part. Compatible with: hardened base jaws of Niederhauser 2-, 3-, 4- and 6-jaw scroll chucks, ø 125 to...

Set of Niederhauser hardened base jaws: they engage the scroll and carry a bolted-on soft or hard top jaw. Changing top jaws no longer wears the chuck thread. Compatible with: Niederhauser scroll chucks with 3 and 4 jaws (ø 125 to 630 mm), 2...

Set of Niederhauser one-piece soft jaws, supplied blank: turned in place to the workpiece diameter, they give full contact and optimum concentricity without marking the part. Compatible with: Niederhauser scroll chucks with 3 and 4 jaws (ø 80 to 630 mm) and 6 jaws...

Set of Niederhauser hardened turning jaws, stepped and reversible: mounted in the outer position, they grip a workpiece in its bore or clamp large diameters. Good to know: Every new 3- or 4-jaw chuck already comes with one set of drilling jaws and one...